The advantages of constructing with roof and facade panels include excellent thermal and acoustic insulation of the building, as well as easy and fast installation onto a prepared structure. The term “insulated sandwich panels” is often used to describe roof and facade panels.
Roof and facade panels consist of sheet metal and an insulation core. The bottom side of the panels can be made of sheet metal, aluminium foil, cardboard, etc.
We offer roof and facade panels from various manufacturers, which differ in terms of the type of insulation core, sheet metal thickness, and the amount of zinc coating on the sheet metal, ranging from 140 g/m2 to 275 g/m2. The most commonly used insulation cores are PUR/PIR insulation core and stone wool. The thickness of roof and facade panels ranges from 10 mm up to 240 mm.
ADVANTAGES OF ROOF AND FACADE PANELS BASED ON INSULATION CORE
PUR has better insulation properties compared to stone wool
PIR has better insulation properties and superior fire resistance compared to stone wool and PUR insulation core
Stone wool has better fire resistance compared to PUR/PIR core
Roof and facade panels are available in sheet thicknesses ranging
from 0.4 to 0.7 mm
Roof panels
ROOF PANELS WITH PIR/PUR INSULATION CORE
Roof panels are used as roofing for industrial and commercial buildings, for external canopies, garden houses, and also for residential buildings.
Roof panels with PUR/PIR insulation and sheet on the upper side and aluminium foil on the lower side:
- Insulation filling with thicknesses ranging from 10 mm to 150 mm (10, 15, 20, 30, 40, 50, 60, 80, 100, 120, 150 mm)
- Panel width: 1000 mm
- The minimum slope for all roof panels is 7%, while special design solutions allow installation even with a slope of 5%.
- Standard colours are: RAL 7016, RAL 8019, RAL 9002, RAL 3009, other colours such as RAL 9006, RAL 9007, etc., are also available.
Roof panel with PUR/PIR insulation and sheet on the upper and lower side:
- Thickness ranging from 30 mm to 200 mm (30, 40, 50, 60, 80, 100, 120, 150, 180, 200 mm)
- Panel width: 1000 mm
- The minimum slope for all roof panels is 7%, while special design solutions allow installation even with a slope of 5%.
- Standard colours are: RAL 7016, RAL 8019, RAL 9002, RAL 3009, other colours such as RAL 9006, RAL 9007, etc., are also available.
ROOF PANELS WITH MINERAL WOOL
You can choose roof panels with mineral wool with the following technical characteristics:
- Sheet on the upper and lower side
- Insulation filling with thicknesses ranging from 50 mm to 240 mm (50, 60, 80, 100, 120, 150, 180, 200, 220, 240 mm)
- Panel width: 1000 mm
- Standard colours are: RAL 7016, RAL 8019, RAL 9002, RAL 3009, other colours such as RAL 9006, RAL 9007, etc., are also available.
Roof panel in tile shape
A special design solution for roof panels is in the form of tiles, which is primarily used in the seaside region.
You can choose from roof panels in tile shape with the following technical characteristics:
- Available in thicknesses of 40 mm, 50 mm, and 100 mm
- The length or dimensions of the roof panel in tile shape can only be supplied in multiples of 350 mm (350 mm, 700 mm, 1050 mm, etc.)
- The standard colours are RAL 8004 and RAL 7016
- Panel width of 1000 mm
- Standard colours are: RAL 8019, RAL 9002, RAL 3009, other colours are also possible, such as RAL 9006, RAL 9007, etc.
Facade panels
FACADE PANELS WITH PIR/PUR INSULATION CORE
Facade panels are used as cladding for industrial and commercial buildings, cold rooms, partition walls, external canopies, garden houses, and also for residential buildings.
You can choose facade panels with PIR/PUR insulation core with the following technical characteristics:
- Facade panels with visible joints, shown in the sketch.
Thicknesses ranging from 25 mm to 240 mm (25, 30, 40, 50, 60, 80, 100, 120, 150, 180, 200 mm)
Panel width 1000 mm - Facade panels with concealed joints, shown in the sketch.
Thicknesses ranging from 40 mm to 240 mm (40, 50, 60, 80, 100, 120, 150, 180, 200 mm)
Panel width 1000 mm - Standard colours are: RAL 7016, RAL 8019, RAL 9002, RAL 3009, other colours are also possible, such as RAL 9006, RAL 9007, etc.
FAÇADE PANELS MADE OF STONE WOOL
You can choose façade panels made of STONE WOOL with the following technical characteristics:
- Façade panels with visible joints, shown in the sketch.
Thicknesses ranging from 50 mm to 240 mm (50, 60, 80, 100, 120, 150, 180, 200, 220, 240 mm)
Panel width 1000 mm - Façade panels with concealed joints, shown in the sketch.
Thicknesses ranging from 50 mm to 240 mm (50, 60, 80, 100, 120, 150, 180, 200, 220, 240 mm)
Panel width 1000 mm - Standard colours are: RAL 7016, RAL 8019, RAL 9002, RAL 3009, other colours are also possible, such as RAL 9006, RAL 9007, etc.
Concealed joints
Visible joints
Façade panels are available with the following profiles on the outer side of the facade panel:
EURO PROFILE
SMOOTH PROFILE
MICRO-RIB PROFILE
Facade and roof acoustic panels
Facade and roof acoustic panels are installed in the construction of buildings that need to meet the prescribed sound insulation values. They are also used for standard construction solutions where improved sound insulation is desired.
You can choose from facade and roof acoustic panels with the following technical characteristics:
- Thicknesses ranging from 50 mm to 200 mm
- Panel width of 1000 mm
- Standard colours include RAL 7016, RAL 3009, RAL 9002, RAL 8019; other colours such as RAL 9006, RAL 9007, etc., are also available.
Gallery
