These are roof coverings made of galvanized steel or aluminium, suitable for various residential and industrial buildings. Various profiles are known, such as trapezoidal or corrugated, which can be used for canopies, facades, walls, ceilings, and even fences.
The main advantage of trapezoidal roofing is quick installation, low weight ranging from 4.5 to 6.00 kg/m2, and the flexibility of the material itself, which means they provide suitable protection even under severe weather conditions such as hail.
We offer profiled sheet metal roof coverings with different zinc coatings ranging from 140 g/m2 to 275 g/m2 and a diverse range of colours in various sheet thicknesses.
Sheet metal roof coverings are available with or without a felt layer on the underside, which prevents condensation penetration, especially for buildings without an air bridge.
Types of Profiles
Trapezoid 40
The Trapezoid 40 roofing profile is the most common profile among Trapezoidoidal roofs and is suitable for various industrial buildings, residential buildings, canopies, ceilings, walls, and even facades. It has good resistance to strong winds and hail.
Plate width: 1050 mm
Covering width: 1000 mm
Minimum slope: 4 °
Weight: 4.87 kg/m2 – 5.85 kg/m2
Available in sheet thicknesses of 0.5 – 0.6 mm
Trapezoid 20
The Trapezoid 20 roofing profile, unlike traditional shapes, gives a more modern appearance to the building due to its lower profiling. Clean straight lines enhance contemporary architecture and the appearance of structures. Especially due to its lower profile, this roofing profile is also suitable for facades.
Plate width: 1160 mm
Covering width: 1100 mm
Minimum slope: 6 °
Weight: 4.50 kg/m2 – 5.10 kg/m2
Available in sheet thicknesses of 0.5 – 0.6 mm
Tile roofing
The tile roofing in the form of a brick tile emulates the appearance of classic roof tiles. It is adorned with more elegant lines, making it highly suitable for residential buildings and can also be used for canopies.
Plate width: 1195 mm
Covering width: 1120 mm
Minimum slope: 8 °
Weight: 4.50 kg/m2 – 5.10 kg/m2
Available in sheet thicknesses of 0.5 – 0.6 mm
Corrugated shape of roofing
Corrugated shape of roofing sheets belong to the category of classic roofing systems (corrugated sheets). Due to their profile, they are particularly suitable for the renovation of buildings covered with asbestos cement sheets, and they also perform excellently as roofs for new constructions and facades. Optionally, they can be obtained in a diverse range of sinusoidal wave heights ranging from 18 mm to 27 mm. They are also available in a perforated form.
Sheet width: 1080 mm
Cover width: 1000 mm
Minimum slope: 5 °
Weight: 4.87 kg/m2 – 5.85 kg/m2
Available in sheet thicknesses from 0.5 mm to 0.7 mm.
Corrugated shape of roofing with imprint
Unlike ordinary corrugated sheets, this roofing material is more suitable as a roof covering due to its beautiful lines that enhance the appearance of the structure. Its unique shape provides exceptional strength and resistance to severe weather conditions. It is suitable for various types of buildings, including residential, commercial, and industrial constructions.
Sheet Width: 1080 mm
Cover Width: 1000 mm
Minimum Slope: 5°
Weight: 4.87 kg/m2 – 5.85 kg/m2
Available in sheet thicknesses ranging from 0.5 mm to 0.7 mm.
Trapezoid 10
The Trapezoid 10 roof cladding has the lowest profile among all Trapezoidoidal roof claddings. It is cost-effective and suitable primarily for facades, walls, and fences. It can also be used as a roof cladding for a minimalist roof appearance. It offers an optimal combination of affordable price and top quality.
Plate width: 1220 mm
Cover width: 1170 mm
Minimum slope: 8 °
Weight: 4.20 kg/m2 – 5.00 kg/m2
Available in sheet thicknesses from 0.5 mm to 0.6 mm.
Trapezoid 50
The Trapezoid 50 roof cladding has the highest profile among all Trapezoidoidal roof claddings, providing exceptional strength. It is suitable primarily for industrial buildings as well as residential structures, facades, walls, ceilings, and fences.
Plate width: 1047 mm
Cover width: 1000 mm
Minimum slope: 3 °
Weight: 4.87 kg/m2 – 5.85 kg/m2
Available in sheet thicknesses from 0.5 mm to 0.6 mm.
Trapezoid 30
The Trapezoid 30 roof cladding is a medium-high profile option with multiple waves. It is suitable primarily for residential buildings, as well as for various purposes such as canopies or industrial structures.
Plate width: 1060 mm
Cover width: 1030 mm
Minimum slope: 5 °
Weight: 4.87 kg/m2 – 5.85 kg/m2
Available in sheet thicknesses from 0.5 mm to 0.6 mm.
LUX Roofing
LUX is a modern roofing solution that adds the highest level of security and elegance to any structure. With its dense profile and special manufacturing technique, it is extremely strong and suitable for both new constructions and renovations.
Plate width: 1203 mm
Cover width: 1160 mm
Minimum slope: 8 °
Weight: 4.50 kg/m2 – 5.10 kg/m2
Available in sheet thicknesses from 0.5 mm to 0.6 mm.
