Roofing and sheet-metal products

Corners are connecting elements of the drainage system between different sides of a building or structure. On a classic gable roof, corners are not needed, but on buildings with more complex geometry, external and internal corners are used.

The basic corner program includes dimensions 25, 28, 33 cm, in internal or external versions and in various sheet metals and colors. Other dimensions can also be supplied by order.

Corner dimensions: 25, 28, 33 cm.
Internal or external: 25, 28, 33, 40 cm.
Box-shaped corners: 25, 28, 33, 40 cm.

Custom production of corners is also possible.

Elbows are the connecting element between the gutter outlet and the downpipe. We offer a wide selection of downpipe elbows in dimensions 60, 80, 100, 120 and 150 mm. A 200 mm dimension is also available by order. Available in various sheet metals and colors. Standard stock includes 72-degree and 85-degree elbows. 40-degree elbows are also available by order.
We offer elbows produced using the folded-seam technique and high-quality welded elbows in various materials and colors.

Elbow dimensions: 60, 80, 100, 120, 150 mm.
Elbows available in versions: 40, 72 and 85 degrees.
Square clamps, dimensions: 60/60, 80/80, 100/100, 120/120, 150/150 mm – with or without nail.
Box-shaped elbows: 80/80, 100/100 mm.
Box-shaped pipe: 80/80, 100/100 mm.

Custom production of elbows is also possible.

End caps are the smallest elements of the drainage system, but they are very important from both an aesthetic and functional point of view, as they close the gutter and direct rainwater drainage toward the gutter outlet or downpipe.
End caps are available in dimensions for semicircular gutters 33, 28 and 25 cm, by order also 40 cm, and in all possible sheet-metal combinations (galvanized, painted galvanized, natural aluminum, painted aluminum, copper, titanium-zinc and stainless steel sheets).
We also offer box-shaped end caps.

End cap dimensions: 25, 28, 33, 40, 50 cm.
Box-shaped end cap: 25, 28, 33, 40, 50 cm.

Custom production of end caps is also possible.

Water diverters are installed on the downpipe and are intended to redirect rainwater from the downpipe into special collectors, so it can later be used, for example, for watering gardens, washing cars, cleaning yards, etc. Materials and dimensions are the same as those of the downpipes from our sales program.

Water diverter dimensions: 80, 100, 120 mm.
Box-shaped water diverters: 80/80, 100/100, 120/120 mm.

Custom production of water diverters is also possible.

An offset pipe for the facade base is available in various materials and colors. Standard dimensions in stock are 80, 100 and 120 mm.

Offset dimensions: 80, 100, 120 mm.
Box-shaped offsets: 80/80, 100/100 mm.

Custom production of offsets is also possible.

We offer clamps for secure fastening of downpipes to the wall in dimensions 60, 80, 100, 120 mm, which are usually always in stock, and by order also in dimensions 150 and 200 mm. Clamps are available in various lengths. Our standard length is 200 mm, with a long version of 300 mm.
Available in stock in various colors and materials.

Clamp dimensions: 60, 80, 100, 120 mm and by order also 150 and 200 mm.
Clamp without screw: M8 or M10 – 60, 80, 120, 150 mm.
Screws: 100, 140, 200, 250, 300 mm.
Clamp with nail: nails 60, 80, 120, 150, 200, 300 mm.

Custom production of clamps is also possible.

A downpipe quickly and reliably drains rainwater from the roof.
Our standard range includes downpipes with diameters of 60, 80, 100, 120 mm, and by order also diameters of 150 and 200 mm. Standard stock length is 6 and 4 meters, except for diameter 60 mm, where the standard length is 2 meters.
On request, we can supply downpipes in custom dimensions. All downpipes are available in various sheet metals and colors.

Downpipes: diameter 60, 80, 100, 120 mm and 150 and 200 mm by order.
Standard length: 4 m

Custom production of downpipes is also possible.

These are so-called hidden brackets. They are commonly used in the Primorska region. Installation is easier and the appearance is better. Available by order in painted galvanized and painted aluminum versions. Dimensions 250, 280, 333 mm.

These are end elements at the end of gutters, featuring a rubber seal for stronger sealing and quick closing. The use of glue, silicone or welding is not required. Available in sizes 250, 280, 333 and 400 mm for painted aluminum. Available by order.

They are used as a replacement for the standard gutter outlet where regulation of the water flow angle is required according to the roof pitch and for easier installation under the roof.
We offer sloped and straight sleeves in painted galvanized sheet metal and painted aluminum in dimensions fi 60, 80, 100, 120 mm.

These are expansion elements for gutters and are supplied by order, also in various lengths. They can be supplied in galvanized, aluminum, copper, TiZn and stainless quality. Available in widths 250, 280, 333, 400 mm.

These are elements for extending gutters. They are available by order in galvanized, aluminum, copper, TiZn and stainless quality.
Standard dimensions: 250, 280, 333, 400 mm. Thanks to the locking system, they guarantee good mechanical sealing and water resistance.

They enable extending pipes from a smaller to a larger size or reducing pipes from one dimension to a smaller one. Available in diameters of 80, 100 and 120 mm.

Square wall-mounted collector boxes are used to collect larger amounts of rainwater without using elbows. In stock in painted aluminum fi 100 mm in anthracite color. They can also be supplied in other colors of aluminum and galvanized sheet metal and in dimensions 80 mm and 120 mm.

These are elements for connecting the downpipe and the rainwater drainage channel. They are available in natural galvanized, painted galvanized, painted aluminum and natural versions for pipes with diameters 80, 100, 120 mm by order.

They are used to redirect or combine water from multiple pipes into one. In stock in natural galvanized, painted galvanized, painted aluminum and natural versions for pipes with diameters 80, 100 and 120 mm.